Home > Products > Accessories for Microscopy
 
 
LaVisionBioTec Accessories

     

High Speed Filter Wheel



  8 position filter wheel accomodates 25mm standard filters
simple load/unload mechanism
<50ms between adjacent positions
filter positions are controlled via RS232 interface
simple protocol, driver for most OS available
adapters for most standards available (c-mount, dovetail, ...)
     

accomodates up to 4 PMTs
separates up to 4 wavelengths by dichroic mirrors and edge filters
simple load/unload mechanism for dichroics and filters
integrated manual shutter
fits to most commercial microscopes
adapters for most standards available (c-mount, dovetail, ...)



Multi PMT Detector Port

   

Triple Imaging Port



  accomodates up to 3 detection devices
3 configurations adjustable
top ccd
rear ccd and top ccd (light can be separated with dichroic or beam splitter)
side port (can be equipped with LaVision BioTec Multi PMT Detector Block)
fits to most commercial microscopes
adapters for most standards available (c-mount, dovetail, ...)
   
   

Modular Single Beam / PMT System

 
   

1. PMT Base Unit

This unit provides basic services for handling PMTs with
a Microscope. Together with the PMT Modules and the
proper A/D cards Lavision BioTec offers a complete solution
for Single Beam / Multi Channel Detection.

 

box, ready to drive up to 8 PMTs, very flexibly linked through 3m cable
digital gain control
power supply for PMT Modules
controlled via RS232
   

2. PMT Module


mounting frame for holding one PMT
integrated gain control
signal amplifier to adapt individual PMTs to Lavisions PMT Base Unit
5 MHz bandwidth
available for almost every Hamamatsu PMT (H5783/H5784/H6779/...)
   
3. Simultaneous A/D Cards

 

up to 4 simultanous channels per PCI card
12bit, 14bit, 16bit available
up to 20MHz per channel
integrated in Imspector Software
   
   
Mass Storage Systems  
   

For our microscope systems we offer specialized mass
storage systems to safely handle the hugh amount of incoming data.
These system consist of a dedicated server (1-2 Intel
Xeon processors) and an OS transparent RAID rackmount.

 

up to 12x300GB EIDE/SATA drives (hotplug)
configurable RAID 0, 1, 0+1, 3 and 5
2 GBit/sec fiber channel from host to server
10/100/1000 BASE-T ethernet